SHROUD AND STAY PLATES
The tripple and single chain plates are similar to the Fisher plates and do have the same mounting dimensions. These plates have a flush back, unlike the old standard plates built over the decades. The base is 1/16 inch thick and 5/16 inch wide. The loops will take either the TB1 , TB2, or PB3 pond boat turnbuckle.
The tripple shroud plate, P/N: MYF-SP-3 , is 2.50 inches long and has the same mounting configuration as Fisher plates.
P/N is MYF-SP-3 is priced at $10.50 each.
The single shroud or stay plate, P/N: MYF-SP-1, is 1.00 inch long and has the same mounting dimensions as the Fisher single.
P/N is MYF-SP-1 is priced at $7.25 each.
LARGE SERIES TEES
A new series of shroud plates is available for larger boats from forty inch on up to "J's" It is machined from a 3/8" by 1/2" bar ans has .156" diameter holes to to take the larger shackle of the PB-2 series turnbuckles. They are available with 1, 3, 5, 7, or 9 holes. The lengths are from 5/8" for the single hole to 3 1/2" long for the nine hole unit.
SP-2 ( SMALLER TEE)
The SP-2 style shroud plates are machined from solid brass stock and offer a more modern look than the Fisher type. The SP-2-Single is 1.00" long, and the SP-2-Tripple is 1.50" long. Both have mounting holes for #2 screws, and the side holes are 0.156" diameter and will accept either the TB1, TB2, or TB2-XL pond boat turnbuckles.
MYF-SP-TRIPLE WITH MYF-TB-PB2 TURNBUCKLE
NEW "L" STYLE SHROUD PLATES
November 2013: A new "L" style shroud plate is machined, not bent, from a 3/8" x 3/8" bar stock. The plate is available in lengths from 1.75inch long to 3.5 inches long, in 1/4 inch increments. Please call for information.
This deck feed thru fairlead, PN: MYF-DFT-1, is designed to be mounted through your deck using a 1/4 inch hole. This part will mount in deck thicknesses of 1/16 to 3/8 inch. The total fitting length is 1.25 inches long, threading is 1/4-28 and includes the brass nut. The thru hole is 5/64 inch diameter with both ends having radius for smooth sheet travel. The deck side of this item looks simular to a winch and has flats to use a 9/32 inch wrench for holding while the nut is tightened.
P/N: MYF-DFT-1 is priced at $8.75
SMALL FLAT FAIRLEAD (ABOVE)
This new fairlead is 3/4 inch long and has #10-32 thread. It is almost flush to the deck or mounting surface. The fairlead is supplied with two washers and hex nut and is priced at $7.25 each.
New deck eyes are available. The smaller one shown has # 2-56 threads, and the larger has # 4-40 threads. Both come with two flat washers and hex nut.
|MYF-DE-2 Top MYF-DE-4 bottom|
The deck mounted eye has a 1/16" thick by 1/4" wide plate, which may be mounted with # 2 screws. This item is great for controlling sheets and other lines on deck.
|DECK MOUNT EYE|
|2 1/5 inch JIB RACK|
Jib racks come in two standard sizes. for larger model use the new TEE sections show above on the page. The smaller racks are shown below.
2 1/2" long RACK
This jib rack is 2.50 inches long and mounting is with six 1/16 diameter holes. The nine rack holes are also 1/16 diameter. It is machined from solid brass Tee stock. Six #0 round head wood screws are included for mounting.
Price: P/N: MYF-JR-2.5 $10.75 each.
1 1/2" JIB RACK
This jib rack is 1.50 inches long and mounting is with six 1/16 diameter holes. The six rack holes are also 1/16 diameter. It is machined from solid brass Tee stock. Six #0 round head wood screws are included for mounting.
Price: P/N: MYF-JR-1.5 $9.50 each.
STANDARD MAST TANGS
These tangs are made from 0.031 thick brass. The length is .93 inch and width is 0.23. Custom Tangs may be ordered in various configurations.
Call or email for more information.
The standard mast tang shown above are $2.65 each.
This traveler shown is a custom built item and can be built to various configurations. Call or email with your requirements
The jumper strut shown may be used on boats of 40 to 60 inches long. The strut is machined from 1/16" thick brass, and mounts to a flat surface.
There are two standard mast steps. One is using the large TEE section, and matches the TEE shroud plates. This step is for boats measuring from 40 inches to 70 inches.
Large TEE Mast Step
The small, flat mast step uses a 1/8" diameter pin on a 1/8" step. It has five adjustments, spaced at 1/4 inch.
Small Flat Mast Step
2346 Salmon Brook Lane
The Villages, FL 32162