Skip to main content

MODEL YACHT FITTINGS

Brass Fittings for Model Sailboats, Pond Boats, and Scale Model Boats
Home  TURNBUCKLES  POND BOAT TURNBUCKLES  POND BOAT FITTINGS  GOOSENECKS and VANGS  FITTING KITS  CUSTOM FITTINGS   

 

 

GOOSENECKS
 

 

Custom made goosenecks can be machined from brass per your dimensions.The mast and boom diameters must be given for the quote.An approved sketch shall be done before machining. These goosenecks consist of four parts: The boom connection uses brass tube soldered to the boom hinge. The mast band, pin and main hinge complete the assembly.Hardware can be provided.

 

Please call or email for a quote.

 

NEW CUSTOM HALF BAND GOOSENECK

 
 
 
 
This half-band gooseneck is available for various mast diameters from 1/2" up, and the boom probe is 5/32" diameter. The picture shows a custom unit which is for a mast diameter of 5/8inch. A matching boom vang can match this mast mount. The sail shackle shown is included.
PRICE: Is dependant on size and design. Please call or email.

 

 FLAT MOUNT GOOSENECKS
.

 

Smaller Flat Mount Gooseneck

 

 

 

The small flat mount gooseneck mounts on a 1/4 inch wide flat area on your mast. The mast mount is 1/4 inch wide by 1.0 inch long and the mast mounting holes are for #2 screws. The boom mounts by drilling a 5/32 diameter hole in the boom and glueing the probe into the boom. Your boom may be faired into the 3/8 inch brass boom diameter or different boom diameters may be ordered. This gooseneck includes a small shackle bolted with #0-80 hex hardware.
Price is dependent on the agreed design. Call or email for more information.

 

LARGE FLAT MOUNT GOOSENECK

 

 

LARGE FLAT MOUNT GOOSENECK

 

 

 

The large flat mount gooseneck mounts on a 3/8 inch wide flat area on your mast. The mast mount is 5/16 inch wide by 1.4 inch long and the mast mounting holes are for # 2 screws. The boom mounts by drilling a 5/32 diameter hole in the boom and glueing the probe into the boom. Your boom may be faired into the 3/8 inch brass boom diameter. Different boom diameters may be ordered. This gooseneck includes a small shackle bolted with #0-80 hex hardware.
Price is dependent on the agreed design. Call or email for more information.
 
 
BOOM VANGS
 
 
 
Various configurations and sizes may be manufactured. The vang length may be modified for your custom use.
The picture below shows the three general sizes of vangs. The top unit is about 6 inches long, and used for boats up to 36 inches overall.
The mid unit is about 10 inches long, and used for boats up to 56 inches overall.
The lower unit is about 15 inches long, and used for BIG boats including "J" boats. The adjustment thread for this unit is #10-32 and uses 5/16 inch rod.

 

 
 
NEW !! ADJUSTABLE BOOM VANG
 
 
Now there is an adjustable boom vang to match the flat mount gooseneck. This unit mounts with screws on the mast and round head screws on the boom. The flat mounting surfaces are 1/4 inch wide. The long rod is 3/32 tube and the mounts are machined from solid brass stock. The length may be adjusted 5/8 inch and is locked with a #2-56 hex nut.
Please call or email for priceing.

 

ADJUSTABLE SMALL BOOM VANG


ADJUSTABLE BOOM END for SMALL VANG

 
 
ADJUSTABLE BOOM END for LARGE VANG
 
 
 
MAST END for LARGE FLAT MOUNT VANG

The flat mount Gooseneck and Vang can also be ordered with the mast half band mounting. Call or email for details

 

 

"J" BOATS
 
I have now developed a series of fittings that may be used on AMYA "J" boats and other large models. The gooseneck and matching boom vang are very strong, and designed to bolt onto the Ludwig mast and boom extrusion.
 
Please call or email for information.
 
 
 
 
Mast end for "J" boat using Ludwig Mast
 
 
 
 
 
 
ADJUSTABLE BOOM END for "J" BOOM END FOR LUDWIG BOOM
 
 
 
 
 
CUSTOM GOOSENECK, BOOM VANG and MAST STEP FOR "J" BOAT
 
 
You can e-mail me at:  rcousineau@msn.com
 
 
Roger Cousineau
2346 Salmon Brook Lane
The Villages, FL 32162

352-633-057